电场对竖直矩形微槽群润湿及表面温度的影响

微槽群在热流密度较大时会达到其毛细极限，可通过主动换热方式之一——电水动力学效应对其进行强化。本文为了研究电场对微槽群表面润湿特性和温度分布的影响，采用平板电极提供电场，蒸馏水作为工质，使用高速相机拍摄微槽内液体润湿长度，测量误差为2.97%～7.46%；使用红外热像仪拍摄电场作用下微槽群表面温度分布，测量误差为2.1%～2.39%。热流密度测量误差范围是9.66%～11.11%。结果表明：电场通过驱动微槽内流体向加热区域流动而提升其润湿性能，且较低热流密度下提升更好。因润湿性能的提升，微槽表面温度得以下降。随着电场增强，微槽横向温度分布的“波峰”、“波谷”差别加大，微槽纵向温度明显降低。当热流密度加大时，温降更为显著，1.4W/cm²热流密度、6kV电压下温降可达到30℃以上。温降的增加反映了电场对微槽的强化润湿进一步提升了微槽换热性能，且电场对较高热流情形下的微槽换热有着更为显著的强化效果。     

Characterizing physical habitat preferences and thermal refuge occupancy of brook trout (Salvelinus fontinalis) and Atlantic salmon (Salmo salar) at high river temperatures

Anthropogenic influences, including climate change, are increasing river temperatures in northern and temperate regions and threatening the thermal habitats of native salmonids. When river temperatures exceed the tolerance levels of brook trout and Atlantic salmon, individuals exhibit behavioural thermoregulation by seeking out cold‐water refugia – often created by tributaries and groundwater discharge. Thermal infrared (TIR) imagery was used to map cold‐water anomalies along a 53 km reach of the Cains River, New Brunswick. Trout and salmon parr did not use all identified thermal anomalies as refugia during higher river temperature periods (>21°C). Most small‐bodied trout (8–30 cm) were observed in 80% of the thermal anomalies sampled. Large‐bodied trout (>35 cm) required a more specific set of physical habitat conditions for suitable refugia, that is, 100% of observed large trout used 30% of the anomalies sampled and required water depths >65 cm within or adjacent to the anomaly. Densities of trout were significantly higher within anomalies compared with areas of ambient river temperature. Salmon parr were less aligned with thermal anomalies at the observed temperatures, that is, 59% were found in 65% of the sampled anomalies; and densities were not significantly different within/ outside anomalies. Salmon parr appeared to aggregate at 27°C, and after several events over 27°C variability in aggregation behaviour was observed – some fish aggregated at 25°C, others did not. We stipulate this is due to variances of thermal fatigue. Habitat suitability curves were developed for velocity, temperature, depth, substrate, and deep water availability to characterize conditions preferred by fish during high‐temperature events. These findings are useful for managers as our climate warms, and can potentially be used as a tool to help conserve and enhance thermal refugia for brook trout and Atlantic salmon in similar systems.     

一种家用手持式红外偏振光治疗仪的设计与实现

红外偏振光治疗仪是一种将红外技术与电子技术应用到医学领域的康复理疗设备,主要用于软组织损伤和慢性疼痛的康复治疗,已在医院得到了推广使用。然而,现有医院使用的台式治疗仪由于体积大、售价高等特点,不方便居家使用。为了开发体积小、售价低、家庭可用的红外偏振光治疗仪,满足家用市场的潜在需求,本文提出了一种新的便携手持式红外偏振光治疗仪,并开发了该智能控制系统。本文首先介绍了一种新的家用手持式治疗仪应具备的特点和关键技术指标,在此基础上设计了手持式治疗仪的硬件总体方案和软件架构,简要介绍了该治疗仪的一些关键技术,最终实现了治疗仪样机的研制。为了验证该样机的性能,本文通过大量的测试,结果表明,研制的手持式红外偏振光治疗仪在关键参数指标上达到了医院同类产品的水平,能够很好地满足家用的需求,具有良好的市场前景。     

Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

红外热成像在乳腺疾病检测的应用研究

乳腺疾病已严重危害女性身心健康,其中乳腺癌更位居全球范围内女性癌症发病率和死亡率首位,因此乳腺癌的早期发现意义重大。传统结构影像学早期检测疾病具有一定局限性,而红外热成像作为功能成像技术可为乳腺癌的早期筛查提供有效线索。因此本文主要就红外热成像在乳腺疾病的早期检测及预后评估的应用价值进行综述。     

一种射频抗电磁干扰的矿用红外温度传感器

设计了一种适用于复杂条件下实施井下温度探测的射频式红外温度传感器。借助于光学系统、光电探测器实时感应井下温度并提取温度信号,同时在DC-DC电源隔离模块中实施EMI滤波以抗电磁干扰,处理后的信号经过A/D转换、运算器放大后显示在LCD上,实施读取数据并记录在传感器的存储片上,实现了矿井复合灾害条件下的温度测试,测试精度控制在±2%。     

综掘设备人员识别预警系统

为解决煤矿井下综合掘进设备由于视野盲区造成的后部输送机摆动误伤行人的安全问题,以红外成像和图像处理技术为基础,设计出一种适用于井下综掘设备的人员识别预警系统。系统采用模块化设计和集成封装,在连续采煤机上进行应用测试并进行结构优化,测试证明系统识别精度高,响应迅速,能够准确识别综掘设备危险区域内的行人,并实现危险区域外2 m范围内的人员预警及1 m范围1 s内的中断停机操作。     

Dynamic thermal tomography: Recent improvements and applications

The concept of “dynamic thermal tomography” (DTT) was suggested in the 1980s. At that time, there was a wave of interest in the tomographic analysis of materials by active thermal nondestructive testing (TNDT). Unlike particles and quanta of electromagnetic radiation, thermal energy propagates in solids by diffusion. Therefore, a purely geometrical approach, that is characteristic of computed X-ray tomography, is replaced in DTT with the analysis of the evolution of temperature versus time. DTT is based on the fact that, in one-sided TNDT, deeper material layers are characterized by longer time delays of the thermal response. The DTT algorithm is relatively stable when used in the inspection of certain materials. Thermal waves experience damping by amplitude and retardation in time. This limits the detection depth and produces certain artifacts that can be suppressed by thresholding maxigrams. DTT can also be considered as a specific way of data presentation that has proven to be useful in many practical cases, including surface and volumetric thermal stimulation of both metals and non-metals. Thermal tomograms appear similar to binary maps of defects, thus enabling more reliable defect detection in comparison to conventional IR thermograms. In this paper, a “reference-free” approach to DTT is proposed being based on some mathematical manipulations with a front-surface temperature response. Also, the possibility of using the DTT principles for processing the results of ultrasonic infrared thermography is demonstrated.     

烧结球团环冷机温度检测及控制装置设计

结合烧结球团工程中环冷工艺存在的不足,着眼于实际应用需求,阐述了烧结球团环冷机温度检测及控制装置的设计思路、设备选型、系统功能设计,并针对设计过程中技术难点和技术要点进行针对性的探讨。     

Efficient Photomodulation of Visible Eu(III) and Invisible Yb(III) Luminescences using DTE Photochromic Ligands for Optical Encryption

This work describes a class of complex combining three dithienylethene units and a lanthanide ion used as an optical system displaying a double encryption method: i) a colorful code, drawn and erased under UV and visible irradiations respectively, due to coloration and discoloration of the photochromic entities, and ii) a concomitant gradual disappearance and progressive restoration of the associated lanthanide ion luminescence triggered with the same stimuli. The innovation of the system stems from the emission color tunability, i.e., with either a lanthanide ion emitting only in the visible range (Eu³⁺) or with another lanthanide ion emitting only in the near infrared (NIR) range (Yb³⁺), therefore observable, or not, to the naked eye. This system is the very first one to achieve efficient repeatable modulation of pure NIR luminescence on photochemical command. Furthermore, it is proven to be highly efficient when embedded in a PDMS polymer opening real opportunities for practical applications as anti‐counterfeiting.